Tool Problem

Hello,
I would like to ask you for help. I have the some problem but I don't know how to solve it. PCB-Gcode generated drill file. When I open this file on the LinuxCNC 2.5.0 so there write me this error:
Near line 139 of ***drill.ngc:
Requested tool 4 not found in the tool table.

On the line 139 is:
M06 T04 (0.0400 )

My tool list is:
( Tool| Size | Min Sub | Max Sub | Count )
( T01 | 0.813mm 0.0320in | 0.0000in | 0.0000in | 0 )
( T02 | 0.900mm 0.0354in | 0.0000in | 0.0000in | 0 )
( T03 | 1.000mm 0.0394in | 0.0000in | 0.0000in | 0 )
( T04 | 1.016mm 0.0400in | 0.0000in | 0.0000in | 0 )
( T05 | 1.321mm 0.0520in | 0.0000in | 0.0000in | 0 )

Tool with number T04 is in the list.

When I rewrite T04 to T03, I have problem with tool number T05.

Do you know where is problem please?

The mentioned code is your tool list, but not the content of the tool file, depending of the GUI you are using, take a look in the tool table of linuxcnc.

Norbert

When this next happens can you please post these two files found in your configuration folder. found in home/linuxcnc/configs/

something.tbl
something.var

Also what version of linuxcnc are you using,
what screen,
are you adding any patches.

Chris M

Thank you very much to your fast answers!

Problem was really in config file from LinuxCNC!