Nurbs (G5.2/G5.3) vs Spline (G5 or G5.1)

diegoroman17
Topic Author
Offline
New Member

12 years 3 months ago #48780 by diegoroman17

Nurbs (G5.2/G5.3) vs Spline (G5 or G5.1) was created by diegoroman17

Hi everybody,

I want know the difference between to use Nurbs and use B-Spline in LinuxCNC. I see that G5.2/G5.3 work fine and it is more readable that G5 or G5.1. There is any disavantage?
Thanks for help me.

Diego

Please Log in to join the conversation.

Time to create page: 0.113 seconds