- Posts: 4
- Thank you received: 0
spindle counts
- cabocozika
- Topic Author
- Offline
- New Member
-
Less
More
11 years 2 months ago #61868
by cabocozika
spindle counts was created by cabocozika
Hi m66 counts spindle turns?
Please Log in to join the conversation.
11 years 2 months ago #61869
by ArcEye
Replied by ArcEye on topic spindle counts
No
M66 waits for a single input
www.linuxcnc.org/docs/devel/html/gcode/m...l#_m66_wait_on_input
encoder.N.counts will count spindle turns if you have an Z index attached
www.linuxcnc.org/docs/devel/html/man/man9/encoder.9.html
M66 waits for a single input
www.linuxcnc.org/docs/devel/html/gcode/m...l#_m66_wait_on_input
encoder.N.counts will count spindle turns if you have an Z index attached
www.linuxcnc.org/docs/devel/html/man/man9/encoder.9.html
Please Log in to join the conversation.
- cabocozika
- Topic Author
- Offline
- New Member
-
Less
More
- Posts: 4
- Thank you received: 0
11 years 2 months ago #61870
by cabocozika
Replied by cabocozika on topic spindle counts
hi, ArcEye
How i do counters spindle turns and disable it?
ex: spindle 300rpm and do 300 turns and disable?
How i do counters spindle turns and disable it?
ex: spindle 300rpm and do 300 turns and disable?
Please Log in to join the conversation.
11 years 2 months ago #61882
by ArcEye
Replied by ArcEye on topic spindle counts
You need to explain what you are trying to do overall.
Past experience of answering narrowly framed questions like this with no other information, is that the answers you get will not be the right ones, or not the best.
If you say what your problem is, rather than ask how to achieve what you have predetermined as the solution, you may well find someone has done it already.
regards
Past experience of answering narrowly framed questions like this with no other information, is that the answers you get will not be the right ones, or not the best.
If you say what your problem is, rather than ask how to achieve what you have predetermined as the solution, you may well find someone has done it already.
regards
Please Log in to join the conversation.
Time to create page: 0.457 seconds
