G5.2 G5.3 3D ??

bkt
Topic Author
Offline
Platinum Member

9 years 11 months ago #82341 by bkt

G5.2 G5.3 3D ?? was created by bkt

is possible to write somethings to these and apply with success??

1.8 G5.2 G5.3 NURBs Block

Code:

Warning: G5.2, G5.3 is experimental and not fully tested.  /* from html manual*/

G0 X0 Y0 Z0

F10 

G5.2 X0 Y1 Z0 P1 L3

     X2 Y2  Z2 P1

     X2 Y0  Z1 P1

     X0 Y0 Z0 P1

G5.3

Regards
Giorgio

Please Log in to join the conversation.

andypugh
Offline
Administrator

9 years 11 months ago #82348 by andypugh

Replied by andypugh on topic G5.2 G5.3 3D ??

[strike]It should be. Does it not work for you?[/strike]

Sorry, I just re-read the title.

I think that NURBS is only supported in XY. You might get Z motion with your code, but it probably won't follow the spline.

Please Log in to join the conversation.

andypugh
Offline
Administrator

9 years 11 months ago #82350 by andypugh

Replied by andypugh on topic G5.2 G5.3 3D ??

Videos from the group that wrote the NURBS code:
www.youtube.com/channel/UCjobmz18Hn_B-s89ctCoQmg

Please Log in to join the conversation.

bkt
Topic Author
Offline
Platinum Member

9 years 11 months ago #82530 by bkt

Replied by bkt on topic G5.2 G5.3 3D ??

I just see these link ... write to us but not have any reply ....
Anyhow Tanks a lots for reply.

regards
giorgio

Please Log in to join the conversation.

Time to create page: 0.496 seconds