G96

More
9 years 6 months ago #90981 by Charlieslasher
G96 was created by Charlieslasher
How to program correctly in css mode.
Dose g96 just control the spindle speed and need a feed/rev code also?

Do i need a g95 f0.05 when using g96

Example code

G97 M3 S1200 x3 z10
G96 M3 S80 D2000
G95 x-0.1 f0.05 (dose this have any effect)

Please Log in to join the conversation.

More
9 years 6 months ago #91179 by andypugh
Replied by andypugh on topic G96
My lathe G-code typically uses both G95 and G96 together.

They do different things, but both adjust according to the other.

Please Log in to join the conversation.

Time to create page: 0.069 seconds
Powered by Kunena Forum