M1XX code calling small program

Hi,
i'am trying with no success to call a small program with M1XX code in MDI. I have build a file:

M101

---

G90
G0X0Y0
exit 0

---

M code link work well, but nothing happen.
Can i call g-codes in M1XX soubroutine?

Thanks,
Michele

Hello,

What you probably want to use is o<filename> to call an external ngc file. This should work in 2.4.x, nor sure it was working properly in 2.3.x

You can use M101 etc. to run external programs.

Rick G

Hello,

Try looking here.
www.linuxcnc.org/docview/html//gcode_main.html#r3_7

Rick G