Lathe pauses at N21

More
5 years 11 months ago #189715 by Flyer007
Replied by Flyer007 on topic Lathe pauses at N21
no encoder, but we have a winner. I added in a "setp spindle.0.speed-in 100" into the HAL and have movement.

Still having no movement on the retract Z move though.

Please Log in to join the conversation.

More
5 years 11 months ago #189734 by Flyer007
Replied by Flyer007 on topic Lathe pauses at N21
Success! With all the testing I went back to F360 and redid the post processing. All good now and roughed out a design I made.

Attachment not found



Thanks everyone!

Please Log in to join the conversation.

Time to create page: 0.230 seconds
Powered by Kunena Forum