Why does it stay in No Tool status? (P3 ... P4.png P5.png)
Answer:
linuxcnc.org/docs/html/remap/remap.html#...lated_codes_t_m6_m61
[Step 1]
Section :4. Upgrading an existing configuration for remapping
Create stdglue.py file.
[Step]
Section 5.3. Specifying the M6 replacement
I edited stdglue.py for two headers as below;
Code:
def change_prolog(self, **words):
try:
if self.selected_pocket < 0:
return "M6: no tool prepared"
if self.cutter_comp_side:
return "Cannot change tools with cutter radius compensation on"
self.params["tool_in_spindle"] = self.current_tool
self.params["selected_tool"] = self.selected_tool
self.params["current_pocket"] = self.current_pocket
self.params["selected_pocket"] = self.selected_pocket
return INTERP_OK
except Exception, e:
return "M6/change_prolog: %s" % (e)
def change_epilog(self, **words):
try:
if self.return_value > 0.0:
# commit change
self.selected_pocket = int(self.params["selected_pocket"])
emccanon.CHANGE_TOOL(self.selected_pocket)
# cause a sync()
self.tool_change_flag = True
self.set_tool_parameters()
return INTERP_OK
else:
return "M6 aborted (return code %.1f)" % (self.return_value)
except Exception, e:
return "M6/change_epilog: %s" % (e)
everything is fine so far
However,
I can't find the answer to the question in the title.
What should I do to prevent tool change every time the machine is turned on? (M6 why are you working?)
Best regards,
mugurlu
