The custom M code does not recognize the 'Q' parameter in the. NGC file

yi2580
Topic Author
Offline
Elite Member

5 years 1 month ago #220864 by yi2580

The custom M code does not recognize the 'Q' parameter in the. NGC file was created by yi2580

I input the customized M101 code (M101 P10 Q5) in the customization. NGC file and load it into linuxcnc. The parameter 'Q' cannot be recognized. G code execution will skip this statement.

Please Log in to join the conversation.

Aciera
Offline
Administrator

5 years 1 month ago #220865 by Aciera

Replied by Aciera on topic The custom M code does not recognize the 'Q' parameter in the. NGC file

Might help if you post your code.

Please Log in to join the conversation.

Time to create page: 0.077 seconds