msg and parameters

Carsten
Topic Author
Offline
New Member

3 years 11 months ago #257171 by Carsten

msg and parameters was created by Carsten

Hi,
i can print parameters, e.g.
(print, Probing result: #5061, #5062, #5063).
Can this also be done with "msg"?

(msg, Probing result: #5061, #5062, #5063)
does not work.

Regards
Carsten

Please Log in to join the conversation.

roland
Offline
Premium Member

3 years 11 months ago #257172 by roland

Replied by roland on topic msg and parameters

try

Code:

(debug,Probing result: #5061, #5062, #5063)

linuxcnc.org/docs/html/gcode/overview.html#gcode:debug

Please Log in to join the conversation.

Carsten
Topic Author
Offline
New Member

3 years 11 months ago #257173 by Carsten

Replied by Carsten on topic msg and parameters

Works,

thanks

Please Log in to join the conversation.

Carsten
Topic Author
Offline
New Member

3 years 11 months ago #257259 by Carsten

Replied by Carsten on topic msg and parameters

Does'nt fit in the G Code category but similar topic:

Are there any means to send a message/debug from an M100 script,
e.g.

#!/bin/bash

/usr/bin/linuxcnc_msg "Switch ..."
halcmd sets switch_...
exit 0

Please Log in to join the conversation.

andypugh
Offline
Administrator

3 years 11 months ago #257400 by andypugh

Replied by andypugh on topic msg and parameters

One way is for your M100 to be a Python script rather than bash.

Code:

#!/usr/bin/env python3

import tkinter
from tkinter import messagebox

ret = messagebox._show("Heading",
                       "Your Message Here",
                       messagebox.QUESTION,
                       messagebox.YESNOCANCEL)

Please Log in to join the conversation.

Time to create page: 0.091 seconds