Odd (debug...) behavior?

KenA
Topic Author
Offline
New Member

3 years 1 week ago #283526 by KenA

Odd (debug...) behavior? was created by KenA

Running on a Sherline Mill.
Trying to debug stuff, getting weird behavior.
I swear I can't see any bugs! ;-)

Started with::

Code:

%
(comment)
G90
(MSG, Start message)
(debug, huh)
o10 if [EXISTS[#<_ken_restart_at_operation>]]
    (debug, before, _ken_restart_at_operation exists)
    (debug,       and has value #<_ken_restart_at_operation>;)
o10 else
    (debug, before: _ken_restart_at_operation does NOT exist)
o10 endif
#<_ken_restart_at_operation> = 0
(debug, AFTER _ken_restart_at_operation has value #<_ken_restart_at_operation>;)

M30
%

When I run this, in the "messages" window, all I get is:

Code:

1 - before, _ken_restart_at_operation exists
2 - AFTER _ken_restart_at_operation has value 0.00

If I take out the first (debug, huh), I get

Code:

1 -      and has value 0.00
2 - AFTER _ken_restart_at_operation has value 0.00

"(MSG, Start message)" is never output
"(debug, huh)" is never output
only 1 of the 2 "debug" in the "if" clause is output
I have to be missing something, but I cant see it

(a more confused than normal) Ken

Please Log in to join the conversation.

KenA
Topic Author
Offline
New Member

3 years 1 week ago #283527 by KenA

Replied by KenA on topic Odd (debug...) behavior?

Sorry about the {code} crap - when I edited it it went all the !&%^$%^

Please Log in to join the conversation.

Aciera
Offline
Administrator

3 years 1 week ago #283576 by Aciera

Replied by Aciera on topic Odd (debug...) behavior?

Seems to work for me on 2.9:

Attachment not found

Please Log in to join the conversation.

andypugh
Offline
Administrator

3 years 6 days ago #283692 by andypugh

Replied by andypugh on topic Odd (debug...) behavior?

KenA wrote:
Sorry about the {code} crap - when I edited it it went all the !&%^$%^

It's frustrating, you need to press the "source" button and re-arrange the tags by hand, as when you edit the editor moves all the tags to the end. Which is a bug in the forum software.

Anyway, I think I fixed it for you.

Please Log in to join the conversation.

Time to create page: 0.074 seconds