M6

More
15 years 5 months ago #9993 by billykid
M6 was created by billykid
I wanted to know if you can control with the M6 toolchange manual call a sub to reset tool. Now to do this manually insert rows.
thanks in advance
Mauro

Please Log in to join the conversation.

More
15 years 5 months ago #10003 by BigJohnT
Replied by BigJohnT on topic Re:M6
I think that is possible with master and maybe with 2.5 branch... you might also use ladder logic to execute a MDI command which can be a sub as well.

www.linuxcnc.org/docview/html/gui_halui.html#sub:MDI

John

Please Log in to join the conversation.

More
15 years 5 months ago #10026 by billykid
Replied by billykid on topic Re:M6
Ok thanks John !

Please Log in to join the conversation.

Time to create page: 0.076 seconds
Powered by Kunena Forum