Changing the openGL colors in the Axis GUI

Yes, "Exit" seems much better. For consistency it would be nice to have the "ESTOP", "OFF" and "ON" on the bottom left change color rather than background color.

I am not sure it is easy to have a "Rapid To Home" procedure hard coded. For instance home is not always 0 and some folk have Z0 at the top and some at the bottom and most lathes would be at the left so the tool would probably end up crashing into the chuck. The last "G90 G0 X0 Y0" doesn't suit me as only one of my machines has an axis with a home value of 0.

Onya mate, look'n good

edit

Lookin' good, I like the idea of toggling the tool touchoff and rapid to home.

Another thing that would be nice was if when the color changer is selected that it appeared with the current color selected

I have pushed this to the test branch.

ok revised in above message

Amended changes for perusal

you can stick it to a MDI command
that can be handeld by the users
or to INI Vars as you can manage that

I agree to the users that like to see that not codd as it depends full on machine build and user behavior
sheet load may not be the same on different setups so home is somewhere else

unzipmust change .ini file display=axis2dont forget to copy as root axis2.tcl to usr/share/axis/tcladd the icons folder content to user/share/axis/images as rootand axis2.py to usr/bin also as root

I tried to get the last files to work,

Copied them in a file manager as root
Changed names after renaming the originals
Changed permissions to what the originals were
Made the .py file executable

Did I miss how to properly get them working somewhere in this thread?

please test again

Postoned.