Files translation

More
9 years 2 months ago #97165 by massimodamassa
Files translation was created by massimodamassa
Now I would like to change some text on the buttons, I know that from source just need to intervene in file /scr/po/it.po but this file where do I find it once compiled?

Thank you

Please Log in to join the conversation.

More
9 years 2 months ago #97211 by jstoquica
Replied by jstoquica on topic Files translation
Hi,

You don't have to compile a source code.

What do you want to modify exactly?

You can modify or add whatever you want through python config files e.g. of your machine folder.

linuxcnc.org/docs/html/gui/

regards.

Please Log in to join the conversation.

More
9 years 2 months ago #97231 by massimodamassa
Replied by massimodamassa on topic Files translation
I intend to change the writing on the buttons

Here is an example

Please Log in to join the conversation.

More
9 years 2 months ago #97271 by jstoquica
Replied by jstoquica on topic Files translation
Hi,

See documentation mentioned above:

linuxcnc.org/docs/html/gui/

You need to modify AXIS gui. It is only read properly documentation.

Regards.

Please Log in to join the conversation.

More
9 years 2 months ago #97276 by massimodamassa
Replied by massimodamassa on topic Files translation
I'm sorry but there is nothing written about it, I managed through the .axisrc file to change something, but not what I want.
Post an example in addition to the link thank you

Please Log in to join the conversation.

More
9 years 2 months ago #97375 by massimodamassa
Replied by massimodamassa on topic Files translation
SOLVED

Please Log in to join the conversation.

More
9 years 2 months ago #97377 by jstoquica
Replied by jstoquica on topic Files translation
Hi,

Congrats. You can share with LinuxCNC community "know how", other people can take advantage of your developments.

Regards.

Please Log in to join the conversation.

More
9 years 2 months ago #97379 by massimodamassa
Replied by massimodamassa on topic Files translation
Editing the /usr/share/axis/tcl/axis.tcl file with gedit

# Comments what you do not need and change the values of buttons and texts

I've been trying for months.

I have to be able to put the pyvcp panel in the sx frame and change the color to the buttons

Please Log in to join the conversation.

More
9 years 2 months ago #97383 by eFalegname
Replied by eFalegname on topic Files translation
more foto please! You know, Massimo! I love your pics.
(let me see your .tcl file please...)

Please Log in to join the conversation.

More
9 years 2 months ago #97390 by massimodamassa
Replied by massimodamassa on topic Files translation
Here it is, but for a 3 axis you will see that it is not good, but you know how to do it.
I also wrote in Italian ;-)

eccolo, ma per un 3 assi vedrai che non va bene, pero' capisci come fare.


www.w3ii.com/it/tcl-tk/tk_widgets_overview.html


Rename it in axis.tcl

Please Log in to join the conversation.

Time to create page: 0.104 seconds
Powered by Kunena Forum