Adding a status tab for MESA card

More
8 years 9 months ago #104819 by kor
Replied by kor on topic Adding a status tab for MESA card
when I start linuxcnc from the console I get a line telling me: module hitcounter skipped. import error no module named hitcounter
followed by: /usr/bin/gladevcp:212: runtime warning: missing handler 'on_LED_di05_hal_pin_changed'
and than it is waiting for gladevcp filling my console with points.
Oo

Please Log in to join the conversation.

More
8 years 9 months ago #104835 by andypugh
Replied by andypugh on topic Adding a status tab for MESA card
Ah, yes, you have specified a handler file in the INI entry. (hitcounter.py)
I guess you followed an example file too carefully. The system is presumably silently failing because that file does not exist, and is then not getting to the point of loacding your postgui halfile.

Your simple GUI shouldn't need a handler file. Just remove the
Code:
-u ./gladevcp/hitcounter.py
part
See linuxcnc.org/docs/2.7/html/gui/gladevcp....command_line_options to see what the options do.

Please Log in to join the conversation.

More
8 years 9 months ago #104841 by kor
Replied by kor on topic Adding a status tab for MESA card
Now I don't have any error msgs an more. But My LEDs won't change their stus either.
The console is still telling me thati it is waiting for gladevcp:
Code:
Starting LinuxCNC... Found file(REL): ./my_Lathe_7i76E.hal Note: Using POSIX realtime hm2: loading Mesa HostMot2 driver version 0.15 hm2_eth: loading Mesa AnyIO HostMot2 ethernet driver version 0.2 hm2_eth: 192.168.1.121: Hardware address: 00:60:1b:10:41:52 hm2_eth: discovered 7I76E-16 hm2/hm2_7i76e.0: Smart Serial Firmware Version 43 Board hm2_7i76e.0.7i76.0.0 Hardware Mode 0 = standard Board hm2_7i76e.0.7i76.0.0 Software Mode 0 = io_spin Board hm2_7i76e.0.7i76.0.0 Software Mode 1 = io_ana_spin Board hm2_7i76e.0.7i76.0.0 Software Mode 2 = io_enc_ana_spin_fv hm2/hm2_7i76e.0: 51 I/O Pins used: hm2/hm2_7i76e.0: IO Pin 000 (P1-01): StepGen #0, pin Direction (Output) hm2/hm2_7i76e.0: IO Pin 001 (P1-14): StepGen #0, pin Step (Output) hm2/hm2_7i76e.0: IO Pin 002 (P1-02): StepGen #1, pin Direction (Output) hm2/hm2_7i76e.0: IO Pin 003 (P1-15): StepGen #1, pin Step (Output) hm2/hm2_7i76e.0: IO Pin 004 (P1-03): IOPort hm2/hm2_7i76e.0: IO Pin 005 (P1-16): IOPort hm2/hm2_7i76e.0: IO Pin 006 (P1-04): IOPort hm2/hm2_7i76e.0: IO Pin 007 (P1-17): IOPort hm2/hm2_7i76e.0: IO Pin 008 (P1-05): IOPort hm2/hm2_7i76e.0: IO Pin 009 (P1-06): IOPort hm2/hm2_7i76e.0: IO Pin 010 (P1-07): Smart Serial Interface #0, pin TxData0 (Output) hm2/hm2_7i76e.0: IO Pin 011 (P1-08): Smart Serial Interface #0, pin RxData0 (Input) hm2/hm2_7i76e.0: IO Pin 012 (P1-09): IOPort hm2/hm2_7i76e.0: IO Pin 013 (P1-10): IOPort hm2/hm2_7i76e.0: IO Pin 014 (P1-11): Encoder #0, pin Index (Input) hm2/hm2_7i76e.0: IO Pin 015 (P1-12): Encoder #0, pin B (Input) hm2/hm2_7i76e.0: IO Pin 016 (P1-13): Encoder #0, pin A (Input) hm2/hm2_7i76e.0: IO Pin 017 (P2-01): IOPort hm2/hm2_7i76e.0: IO Pin 018 (P2-14): IOPort hm2/hm2_7i76e.0: IO Pin 019 (P2-02): IOPort hm2/hm2_7i76e.0: IO Pin 020 (P2-15): IOPort hm2/hm2_7i76e.0: IO Pin 021 (P2-03): IOPort hm2/hm2_7i76e.0: IO Pin 022 (P2-16): IOPort hm2/hm2_7i76e.0: IO Pin 023 (P2-04): IOPort hm2/hm2_7i76e.0: IO Pin 024 (P2-17): IOPort hm2/hm2_7i76e.0: IO Pin 025 (P2-05): IOPort hm2/hm2_7i76e.0: IO Pin 026 (P2-06): IOPort hm2/hm2_7i76e.0: IO Pin 027 (P2-07): IOPort hm2/hm2_7i76e.0: IO Pin 028 (P2-08): IOPort hm2/hm2_7i76e.0: IO Pin 029 (P2-09): IOPort hm2/hm2_7i76e.0: IO Pin 030 (P2-10): IOPort hm2/hm2_7i76e.0: IO Pin 031 (P2-11): IOPort hm2/hm2_7i76e.0: IO Pin 032 (P2-12): IOPort hm2/hm2_7i76e.0: IO Pin 033 (P2-13): IOPort hm2/hm2_7i76e.0: IO Pin 034 (P3-01): IOPort hm2/hm2_7i76e.0: IO Pin 035 (P3-14): IOPort hm2/hm2_7i76e.0: IO Pin 036 (P3-02): IOPort hm2/hm2_7i76e.0: IO Pin 037 (P3-15): IOPort hm2/hm2_7i76e.0: IO Pin 038 (P3-03): IOPort hm2/hm2_7i76e.0: IO Pin 039 (P3-16): IOPort hm2/hm2_7i76e.0: IO Pin 040 (P3-04): IOPort hm2/hm2_7i76e.0: IO Pin 041 (P3-17): IOPort hm2/hm2_7i76e.0: IO Pin 042 (P3-05): IOPort hm2/hm2_7i76e.0: IO Pin 043 (P3-06): IOPort hm2/hm2_7i76e.0: IO Pin 044 (P3-07): IOPort hm2/hm2_7i76e.0: IO Pin 045 (P3-08): IOPort hm2/hm2_7i76e.0: IO Pin 046 (P3-09): IOPort hm2/hm2_7i76e.0: IO Pin 047 (P3-10): IOPort hm2/hm2_7i76e.0: IO Pin 048 (P3-11): IOPort hm2/hm2_7i76e.0: IO Pin 049 (P3-12): IOPort hm2/hm2_7i76e.0: IO Pin 050 (P3-13): IOPort hm2/hm2_7i76e.0: registered Found file(REL): ./custom.hal note: MAXV max: 25.000 units/sec 1500.000 units/min note: LJOG max: 25.000 units/sec 1500.000 units/min note: LJOG default: 6.000 units/sec 360.000 units/min note: jog_order='ZX' note: jog_invert=set(['X']) Waiting for component 'gladevcp' to become ready.......................................................................................................................................................

Please Log in to join the conversation.

More
8 years 9 months ago #104842 by andypugh
Replied by andypugh on topic Adding a status tab for MESA card
That might be the -W command you gave it. Perhaps your GUI doesn't call itself "gladevcp".

-W defines a specific name to wait for and waits for that exact name to appear in the HAL.

Please Log in to join the conversation.

More
8 years 9 months ago #104845 by kor
Replied by kor on topic Adding a status tab for MESA card
Thanks Andy now one of the pins works because the other one is linked to home-z it crashed so I uncommented that one.
Is there a way to link the already connected signals to the LEDs? and still keep their function?

Please Log in to join the conversation.

More
8 years 9 months ago #104849 by andypugh
Replied by andypugh on topic Adding a status tab for MESA card

kor wrote: Thanks Andy now one of the pins works because the other one is linked to home-z it crashed so I uncommented that one.
Is there a way to link the already connected signals to the LEDs? and still keep their function?


Yes, just link the _signal_ to the gladevcp tab.

Anywhere that you have
Code:
net a-specific-signal hm2_7i76E.0.input-00 => motion.something-elce
You can also have (anywhere in any HAL file)
Code:
net a-specific-signal gladevcp.LED-something-or-other

Please Log in to join the conversation.

Time to create page: 0.050 seconds
Powered by Kunena Forum