Screen like Mach

Good day to all. I'm a milling machine but not a programmer, I switched to Linuxcnc with match3. and not how I can not understand how to change the screen since the original is simply too useless. Could I have been pushed into the finished screen with the functions similar to the match3 and how to install it. Thank you in advance.
By the way installing Linuxcnc is as simple as twice two compared to match3

Having never used Mach3, what features do you need or want that are missing?

Take a look in the Documents in the User Interfaces section for the different UI's that are available.

JT

pavelshakal wrote: Good day to all. I'm a milling machine ........

He IS a milling machine !!!

Sorry for the translation! )))

I need a button "go to home" , processing speed indicator and processing time indicator

The rest suits me

I use the standard Axis user interface on the routers I've retrofitted and by adding an additional VCP (virtual control pannel) to the Axis UI I have added those features.
And there are instructions in the documentation how to build similar VCP panels and integrate them with your user interface of choice.
Here is a screen shot of the UI used on one of our machines. The time it takes to do a run is shown at the top right (cycle time), a button that returns the machine to the home/park position (and resets some other settings) is the "CLEAR" button. (the machine's current velocity is part of the built in DRO, so isn't added to the VCP.)

cool !!! How to do this? ))))

can it be possible for non-programmers