Servo Tuning wont open

Hello,

i hope i am not getting annoying but i cannot open the Servo Tuning tab. nothing happens, restarted linuxcnc and the whole pc but still doesnt open.

i have searched in the internet but havent found a solution.

Do you mean the calibrate menu in Axis?

This allows you to conveniently tweak tuning parameters in real time
and give you the option to save them back to your ini file

yes but when i click on it, nothing happens. The window simply doesnt pop up

My guess is that its some issue with your .ini file
can you post it here?

3D-Master wrote: yes but when i click on it, nothing happens. The window simply doesnt pop up

It looks for certain entries in the INI file.

Hmmm... I wonder if those entries have different names in 2.8?

Seems not, this old bug tracker indicates that something happened, just not exactly the right thing.
github.com/LinuxCNC/linuxcnc/issues/94

github.com/LinuxCNC/linuxcnc/commit/f0e10a37a
github.com/LinuxCNC/linuxcnc/commit/4d1cdd76d
github.com/LinuxCNC/linuxcnc/commit/740c4252a

740c4252a:

Here is my ini file

I have linuxcnc 2.7.14

github.com/LinuxCNC/linuxcnc/commit/f0e10a37a
github.com/LinuxCNC/linuxcnc/commit/4d1cdd76d
github.com/LinuxCNC/linuxcnc/commit/740c4252a

740c4252a:
Now support additional stanza names:
[JOINT_N]name=value (suffix N is a joint number)
[AXIS_L]name=value (suffix L is an axis letter)
[TUNE]name=value (no suffixes for the [TUNE] stanza)

so do i have to edit the file/s manually?

Have you tried running linuxcnc from the console, and watching for any error messages when you click the configuration button?