Missing the right side PYVCP panel

My panel does not launch and as I read the documentation I have everything I need. I have panel.xml under DISPLAY PYVCP = panel.xml. I have POSTGU.halI = custom_postgui.hal under HALFILE. The file gustom_postgui.hal calls Panel_options.hal and panel.xml. Panel_options.hal and panel.xml have both worked in the past.

I had moved this mill and during shipment the monitor and hard drive where destroyed. With the new hard drive I installed the latest stable image.

It Shoudt be There if your monitor is at 1024 or above

using Debian weezy or stretch 2.7.14

AXIS as GUI

Thanks for your reply. I changed the monitor resolution to 800 x 600 but the problem still exists. On my previous build I had similar problem. I stumbled on to a solution by having one file call another file and changing file names. This solution made no sense. So this time I went to the latest documentation and followed that. Are you familiar with the file name rules.

Zip and attach your config files so we can see what you have.

JT

Attached is the files I have tried, included is the ini file which calls PYVCP = panel.xml in [DISPLAY] and POSTGUI_HAL = pyvcp_panel.hal which is all that is required as I understand it. Panel.xml has the widgets and label spacing and has worked in the past. PYVCP has the pin assignments and has also worked in the past.

Catching up after a holiday. Is this problem still there?

The problem still exists. I am currently setting up another computer and instillation.

There are a few of typos in pyvcp-panel.xml
hal pin for bar was pyvcp.spindle-speed instead of spindle-speed
missing end tag for second vbox
almost all the code was inside a single tag
corrected file is attached

Cheers, Phill

Thanks for you for your help but the problem still exists. However now I know the xml and hal files are functional. I am thinking that the machine is launching from the incorrect file

If you are running linuxcnc from the command line you should get an error message.

Cheers, Phill.