Default settings when loading

More
6 years 6 months ago #163122 by mooser
Default settings when loading was created by mooser
Where are the default settings stored when LinuxCNC / AXIS loads? I work in diameter and keep forgetting to set the G7
I've looked in the docs but only see what the defaults are not really where they can be changed?
Thanks
M

Please Log in to join the conversation.

More
6 years 6 months ago #163124 by cmorley
Replied by cmorley on topic Default settings when loading
linuxcnc.org/docs/2.7/html/config/ini-co...ml#_rs274ngc_section

[RS274NGC]
RS274NGC_STARTUP_CODE =

Chris

Please Log in to join the conversation.

More
6 years 6 months ago #163131 by mooser
Replied by mooser on topic Default settings when loading
Startup, I kept looking for default
Thanks I'll add that tomorrow
M

Please Log in to join the conversation.

More
6 years 6 months ago #163291 by mooser
Replied by mooser on topic Default settings when loading
Worked perfect, thanks
M

Please Log in to join the conversation.

Time to create page: 0.075 seconds
Powered by Kunena Forum