I dont have axis interface in Applications-CNC

More
6 years 2 months ago #180109 by kevin19
I dont have axis interface in Applications-CNC was created by kevin19
Hello, I have installed linuxcnc 2.9 but I don’t have the axis interface in the Applications. Inside Applications-CNC, I only have “Documentation”, “pncconf wizard” and “stepconf wizard”.Can anyone tell me what should I do to open the axis interface?

Please Log in to join the conversation.

  • BeagleBrainz
  • New Member
  • New Member
More
6 years 2 months ago #180113 by BeagleBrainz
Replied by BeagleBrainz on topic I dont have axis interface in Applications-CNC
So only 3 entries, no entry titled "Linuxcnc" along with the three you mentioned.
Open a terminal and run
Code:
linuxcnc
which opens the the linuxcnc configuration selector.
Sometimes, for reasons, logging out & logging back in can fix up the menu entries.
One tip, mentioning your current linux distro & version can help.

Please Log in to join the conversation.

More
6 years 2 months ago #180117 by tommylight
Replied by tommylight on topic I dont have axis interface in Applications-CNC
LinuxCNC is for some unknown reason in the "accessories" menu.

Please Log in to join the conversation.

More
6 years 1 month ago #180504 by kevin19
Replied by kevin19 on topic I dont have axis interface in Applications-CNC
Thank you!

Please Log in to join the conversation.

Time to create page: 0.073 seconds
Powered by Kunena Forum