Camera tab in Axis

thanks I'll give it a try this evening

well i learnt something else (works great!)

forum.linuxcnc.org/media/kunena/attachme...align-howtoembed.pdf

Well, i got it working, not exactly sure why, but it works.

I changed the PC, it was way overdue anyway. Installed the buster ISO with 2.8, followed the instructions on the wiki, and got an error. 
Then i installed glade the way you would if you wanted to do a glade vcp panel. and it works!

Henk

Hello,
i have some questions about the camview tab in AXIS. I added this lines in my ini.

EMBED_TAB_NAME = CAM
EMBED_TAB_COMMAND = halcmd loadusr -Wn camera qtvcp -c camera -x {XID} -o size=700,700 -o rotincr=.0 cam_align

so far so good. Unfortunately I couldn't find any documentation about the additional options.

Is there a list for this? For example, what does -Wn mean?
It's working great so far, but I have to rotate the camera and can't find the option to do so. I just copied the lines from my ini together. So I'm a total noob
 

-Wn is a halcmd switch (option) , not a qtvcp -switch.
It mean Wait for the Named component to load before continuing.

Sparse docs here:
linuxcnc.org/docs/stable/html/gui/qtvcp-...vcp:panels:cam-align

Rotating the image was just recently added to the master branch though, so unless you are using that it won't be easy to rotate the image.

Chris

Many thanks for the quick response. That helps me. Then I will first rotate the mount of my camera. At least I can do hardware
Have a nice day.

look on "Update auf 2.9.2"
schau mal auf "Update auf 2.9.2"

I first found a lot of advise to use mplayer. Could not make it do anything. (LinuxCNC 2.9.4 Debian 12 Bookworm PREEMPT-RT ISO) download from 9th Feb 2025

The qtvcp lines in the *.ini made a picture with several cameras I tried.