The Z axis does not move on the preview screen

More
3 years 10 months ago #260559 by COFHAL
The Z axis does not move on the preview screen was created by COFHAL
The Z axis does not move on the preview screenI have a problem with the GUI AXIS, it is from a lathe, on the preview screen when I physically move the Z axis this axis moves normally but on the screen it always stays in the initial position. I append the hal and INI files

Please Log in to join the conversation.

More
3 years 10 months ago #260596 by phillc54
Replied by phillc54 on topic The Z axis does not move on the preview screen
In the INI file, try​​ GEOMETRY = xz instead of GEOMETRY = xy

Please Log in to join the conversation.

More
3 years 10 months ago #260602 by Todd Zuercher
Replied by Todd Zuercher on topic The Z axis does not move on the preview screen
That GEOMETRY setting line is in the [DISPLAY] section of your ini file.

Please Log in to join the conversation.

Time to create page: 0.075 seconds
Powered by Kunena Forum