Debian 12 testing with latest updates.
I'm able to launch my VCP via gladevcp well enough, but when I include it in linuxcnc, I get this error:
Code:
(gladevcp:213239): Gtk-WARNING **: 19:09:22.058: GtkPlug only works under X11
<commandline>:0: gladevcp exited without becoming ready
Code:
$ linuxcnc axis.ini
LINUXCNC - 2.10.0~pre0
Machine configuration directory is '/home/rmann/camsync-vcp'
Machine configuration file is 'axis.ini'
Starting LinuxCNC...
emc/iotask/ioControl.cc 786: can't load tool table.
linuxcnc TPMOD=tpmod HOMEMOD=homemod EMCMOT=motmod
Note: Using POSIX non-realtime
Found file(lib): /home/rmann/linuxcnc/lib/hallib/core_sim.hal
Found file(lib): /home/rmann/linuxcnc/lib/hallib/sim_spindle_encoder.hal
Found file(lib): /home/rmann/linuxcnc/lib/hallib/axis_manualtoolchange.hal
Found file(lib): /home/rmann/linuxcnc/lib/hallib/simulated_home.hal
Found file(lib): /home/rmann/linuxcnc/lib/hallib/check_xyz_constraints.hal
note: MAXV max: 5.000 units/sec 300.000 units/min
note: LJOG max: 5.000 units/sec 300.000 units/min
note: LJOG default: 0.250 units/sec 15.000 units/min
note: jog_order='XYZ'
note: jog_invert=set()
libGL error: No matching fbConfigs or visuals found
libGL error: failed to load driver: swrast
[GladeVCP][INFO] Logging to: /home/rmann/gladevcp.log (logger.py:107)
[GladeVCP.QTVCP.QT_ISTAT][WARNING] Embeded tab configuration -invalid number of TAB_NAMES vs TAB_LOCATION - guessing default. (qt_istat.py:421)
Version: 3.11.1 (main, Dec 31 2022, 10:23:59) [GCC 12.2.0]
(gladevcp:213239): Gtk-WARNING **: 19:09:22.058: GtkPlug only works under X11
<commandline>:0: gladevcp exited without becoming ready
Embeded tab command "halcmd loadusr -Wn camsync gladevcp -c camsync -u ./camsyncvcp.py -x 12583336 ./camsync.ui" exited with error: 1
Shutting down and cleaning up LinuxCNC...
task: 1017 cycles, min=0.000002, max=0.007927, avg=0.001155, 0 latency excursions (> 10x expected cycle time of 0.001000s)
Note: Using POSIX non-realtime
LinuxCNC terminated with an error. You can find more information in the log:
/home/rmann/linuxcnc_debug.txt
and
/home/rmann/linuxcnc_print.txt
as well as in the output of the shell command 'dmesg' and in the terminal
If I launch my panel in gladevcp, it runs, and I don't get the two errors, and it displays my UI:
Code:
$ gladevcp -c camsync -H camsync.hal -u camsyncvcp.py camsync.ui
[GladeVCP][INFO] Logging to: /home/rmann/gladevcp.log (logger.py:107)
tool_mmap_user(): tool mmap not available
poll(): continuing without tool mmap data
Version: 3.11.1 (main, Dec 31 2022, 10:23:59) [GCC 12.2.0]
I'm at a point where I need to start integrating with Axis, so I'd love to get past this.
