Probe panel for Axis GUI

Yeah inches...

Ok. There are two minor things to change. I am currently not at home but can answer later in more detail.

One is the fast forward in between a pocket. Here I use 5 mm to the estimated contact to use faster speed while probing. 5 inches just leads to the fact that there ist no faster movement.

The second one you find yourself. I have some (yes I know quick n dirty programmed) safety functions. In inches the values are way smaller so that the macro thinks that the probe is not calibrated.

Can you show your tool table please.

Julian

In the probe_pocket macro:

#<ff_distance> = 5 (5 mm distance to contact with fast forward speed)

Just change accordingly.

In the xml you can change mm to inch for the tab. Thats just optical change.

Thank you for the heads up. I believe I found all of the changes needed to be made.

I have also attached my tool table.

-Sean

 

Perfect.

Tooldata looks as it should (for a standard 2mm tooltip).

So. Have fun.

Julian

 

When I press any of the keys X0 YO ZO X this error Unknow command M: M130 appears. What could be the cause?

instructions for that are in the readme

how install and use if not newer before has understand code, or hal or ini or what all this need and what all have. and were have. not understand code.

Olá a todos.
Tentei usar o EasyProbe na minha fresadora CNC. Instalei seguindo o vídeo do Talla83, mas ao calibrar, aparece a seguinte mensagem: "A sonda já está ativada" ao iniciar o comando G38.2 ou G38.3, e ao zerar manualmente, aparece outra mensagem: "Código M desconhecido usado: M130..."
Anexei os arquivos .hal, .ini e Probe_postgui.
O que estou fazendo de errado?