Abort produces G-code Error solvd

In AXIS 2.9.2

If something like   (abort, Tool L GT 35)   is in G-Code, i get an error
So i had to replace abort by MSG, followed by an M0, to run this file.


 


in MDI i can enter  (abort, Tool L GT 35)  and the message is displayed

 

If i test for #<_task> the preview works, and abort message is displayed and it is aborting when run program and the abort condition is met.   #<_task> was the solution when used in a subroutine

linuxcnc.org/docs/stable/html/remap/rema...d_code_ngc_procedure