M3/M5 not working

garthnoakes
Topic Author
Offline
Senior Member

2 years 3 months ago #305698 by garthnoakes

M3/M5 not working was created by garthnoakes

When I issue M3 and M5 commands, they work in reverse to the documentation. I'm not concerned about that - what does concern me is that an M3 in a program turns the power off, but when the program terminates, it immediately turns back on. This is frankly pretty dangerous. If I then manually enter an M3, it turns off permanently

Please Log in to join the conversation.

tommylight
Offline
Administrator

2 years 3 months ago #305700 by tommylight

Replied by tommylight on topic M3/M5 not working

Invert the output

Please Log in to join the conversation.

garthnoakes
Topic Author
Offline
Senior Member

2 years 3 months ago #305939 by garthnoakes

Replied by garthnoakes on topic M3/M5 not working

Thanks! that has fixed it

Please Log in to join the conversation.

Time to create page: 0.092 seconds