Jog speed

ALS
Topic Author
Offline
New Member

4 months 4 weeks ago #346847 by ALS

Jog speed was created by ALS

Hi guys, I'd like to know how to read the value of the jog speed component as shown in the attached image.

Attachment not found

Please Log in to join the conversation.

meister
Offline
Platinum Member

4 months 4 weeks ago #346850 by meister

Replied by meister on topic Jog speed

You can read the values for any of these controls, except for the jog speed control.

Please Log in to join the conversation.

meister
Offline
Platinum Member

4 months 4 weeks ago #346851 by meister

Replied by meister on topic Jog speed

a usefull commandline to check changes in hal

Code:

# halcmd show | grep -v "time\|period\|,\|ready$" > /tmp/t1 ; while sleep .1; do halcmd show | grep -v "time\|period\|,\|ready$" > /tmp/t2; diff /tmp/t1 /tmp/t2 | grep "^>\s*[1-9]" | sort -u ; mv /tmp/t2 /tmp/t1 ; done

>     23  float OUT                  3.97  halui.feed-override.value
>     23  float OUT                  4.71  halui.feed-override.value
>     23  float OUT                     5  halui.feed-override.value
>     23  float OUT                  0.57  halui.rapid-override.value
>     23  float OUT                  0.38  halui.rapid-override.value
>     23  float OUT                  0.15  halui.rapid-override.value

Please Log in to join the conversation.

Time to create page: 0.076 seconds