Axis interface and "useful" conversational scripts in python

I am a new user of a few months with linuxCNC and AXIS and  found a resource of several Python scripts to use in Axis but many of them failed to work as most where created many years ago and not for use in Python3 so I fiddled and tweaked until they did then I enhanced some and created some others for my own use to save having to go to CAD to make toolpaths and run from a button on the sidebar in Axis.

Would these be of any interest I am willing to share (not knowing how to is an issue ). ADMIN...Unsure if this is the correct place to post this if not please let me know and either move to somewhere else or delete. 

More functions have since been added

OK (hope this works)

First Python3 script "linuxcnc_grid_tool_G81_axis.py" this can be run eother from within axis and loads toolpath directly into axis or from desktop using python on Geady or terminal and save to .NGC file.

The script I use to engrave a grid on my sacrificial MDF machine bed and drill fixing holes at grid intersections

I have 12 scripts in total available to upload and also 5 subroutines i can upload them individually or as a zip.

 

 

I have added a zip file containing subroutines and python scripts I use on Axis I have them listed below some I have made and others I have tweaked to work in Python3 (not all needed doing).

Contained in Python Scripts Folder

    Engrave.py              A script to create a single line of text.

    Ruler.py                A script to generate a ruler with markings.

    Bezel.py                A script to create a rotary scale with or without number markings.

    Contour.py              A script to enable creating toolpaths on a variety of shapes Circle,oval,rectangle,slot,polygon and path with a range of modifiers.

    Face.py                 A script to generate toolpath to cut a defined area.

    Grill.py                A script to generate a set of holes for a grill in a variety of shapes with user definable settings.

    Holecircle.py           Script runs from within linuxcnc to create toolpath to drill holes on a PCD.

    Grid_G81.py             Script to drill a grid of hole or mill a grid of lines or both useful when creating sacrificial work beds on a router.

    PresetG54.py            Script to create a preset file for G54 offset.

    Pocket.py               Script to create toolpaths to cnc machine round and rectangular pockets.

    pcd_hole_circle.py      Script to generate toolpath to drill holes on a PCD or save as a csv file.
 

Subroutines
Contained in the Subroutines folder

     g54_here.ngc           Sets G54 offset at current position
     
     go_to_home.ngc         returns tool to G54 x and y position after raising Z

     safe_g28.ngc           Sends the tool back to absolute machine home after raising Z

     z_touch.ngc            simple subroutine to set Z height with a touch probe 

Thank you for this, i remember a long while back the "grill" saved me a lot of time as i needed to do a 2X1 meter grill with nearly 1000 holes.
Did not use them since then, but it is very nice to know they still work, if i ever need them.

I got interested in them as they are an easier option for straight forward machining rather than having to go onto my other pc in my office as i dont connect machines to my network and having to create toolpaths then load them in and if i want a change to go through a mess of work scripts i discovered are great within minutes toolpath made and loaded .