Tool Name

russtuff
Topic Author
Offline
Junior Member

11 years 1 week ago #64162 by russtuff

Tool Name was created by russtuff

At the bottom-left of Axis my tool number is listed, but I would to have the actual tool name shown in pyVCP. Is this possible? I've been searching online but with no luck.

Thanks.

Please Log in to join the conversation.

andypugh
Offline
Administrator

11 years 1 week ago #64164 by andypugh

Replied by andypugh on topic Tool Name

rusmannx wrote: At the bottom-left of Axis my tool number is listed, but I would to have the actual tool name shown in pyVCP. Is this possible? I've been searching online but with no luck..

No, it isn't possible.

You can _probably_ do it with GladeVCP. Some python code in the background could open and parse the tool table to associate a string with each tool number.

Please Log in to join the conversation.

russtuff
Topic Author
Offline
Junior Member

11 years 1 week ago #64165 by russtuff

Replied by russtuff on topic Tool Name

andypugh wrote:
No, it isn't possible.

You can _probably_ do it with GladeVCP. Some python code in the background could open and parse the tool table to associate a string with each tool number.

Bummer. Thanks for the quick reply though

Please Log in to join the conversation.

Time to create page: 0.261 seconds