No data refresh pYVCP window

More
5 years 4 weeks ago #221939 by Leintz2
No data refresh pYVCP window was created by Leintz2
Hi !
I have strange problem in pYVCP customized sidebar.
For example I'll change the tool in MDI number 1 to 5 (Halmeter show me correct value) but now data refresh in pyVCP sidebar.
Same problem with speed meter, feedrate mater, pressure meter and so on (all reading parameters do not work)... but all input commands like buttons (in pyVCP panel) works fine.
Maybe i have deleted something important.
Any idea?
Files attached...
 

Please Log in to join the conversation.

More
5 years 4 weeks ago #221962 by andypugh
Replied by andypugh on topic No data refresh pYVCP window
Do you have non-ascii characters in the HAL file?

I see
Code:
net tool-number => pyvcp.tooriist #tööriista number #net spindle-at-speed => pyvcp.kiirus #ledi sisselülitamine kui kiirus käes #töölaua kiiruse indikaator loadrt mult2 addf mult2.0 servo-thread setp mult2.0.in0 60
which might explain the problem.

Please Log in to join the conversation.

More
5 years 3 weeks ago #222193 by Leintz2
Replied by Leintz2 on topic No data refresh pYVCP window
It really works!
Thank you!

Please Log in to join the conversation.

Time to create page: 0.118 seconds
Powered by Kunena Forum