spinbox problem

bonjour , 
je viens de passer de linux 2.5.4 de ma mortaiseuse a 2.9.5, le probleme, est que les signaus de spinbox ne passe plus .j 'ai lu qu il y avais un changement de pyton , j 'ai essayer plusieurs piset et changer post-gui halfile , mais rien ne chan,ge , pouvez vous m 'aider ?
 

Google translation:
I just upgraded my mortiser from Linux 2.5.4 to 2.9.5, but the problem is that Spinbox signals are no longer working. I read that there was a change in Python, I tried several Python scripts and changed Post-GUI Halfile, but nothing changed. Can you help me?
-
What is the exact error you get?

The problem is that python 2.7 which you use was deprecated with the release of Debian Bullseye in favour of Python 3. The only solution is to rewrite you scripts using Python 3. Python 2.7 and 3.0 are not compatible.

The entry for python is missing in ini file. In my config, its after [RS274NGC]
Make shure toplevel.py is in the path, and  stdglue.py if needed for remap


[PYTHON]
PATH_PREPEND= /home/jef/linuxcnc/configs/Python/
PATH_APPEND=  /home/jef/linuxcnc/configs/Python/
TOPLEVEL= /home/jef/linuxcnc/configs/Python/toplevel.py



Edit:
I was wrong with the python entry. PYVCP panel works without that

look latency test
 today morning is ok, no problem ,after 1h30 alarm and stop , what is it???????