active jog change

Sorry if this topic has been covered or is trivial.

I just set up my Logitec Wingman Attack to jog the axis on my mill.

Currently the jog is just a static setp number

I understand how to map inputs to pins to control them.

I don't know how to make an t/f input add or subtract from a parameter, how can i do this?

Wolfmansbrother wrote: I don't know how to make an t/f input add or subtract from a parameter, how can i do this?

You would commonly use a mux2 HAL component to choose one of two values then either use that value directly or add it to some other value.

If mux2 is not suitable (need more inputs, need a different data type) then there is a mux4, mux8 or mux_generic as an alternative