The following session worked for me
Code:
telnet localhost 5007
Trying ::1...
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
hello EMC me 1
HELLO ACK i 1.1
set enable EMCTOO
set enable EMCTOO
set echo off
set echo off
set estop off
set machine on
set mode auto
set open /tmp/1.ngc
set run 1
set open /tmp/2.ngc
set run 1
I use the following simple ngc files for testing:
Code:
$ cat /tmp/1.ngc
(debug, 1.ngc)
m68 e0 q1.1111 ;set pin motion.analog-out-00
m2
$ cat /tmp/2.ngc
(debug, 2.ngc)
m68 e0 q2.2222 ;set pin motion.analog-out-00
m2
and monitor the running program with halshow using:
Code:
$ cat l.halshow
pin+motion.analog-out-00
$ halshow l.halshow &
