run/pause/restore button

More
9 years 6 months ago #92165 by caio
run/pause/restore button was created by caio
hi everyboby,
i would like to add an on/off button (on the same button) on my joypad.
i tried the example in this page (flood button)
wiki.linuxcnc.org/cgi-bin/wiki.pl?Using_...ove_Your_CNC_Machine
but when i press the button it switch on-off continuosly until button is released.
if i press it very very shortly, it work, but is a little dangerous for the machine.
i believe i need a flipflop, but i can't find the way to use it.
do you have some suggestion?

thanks

Please Log in to join the conversation.

More
9 years 6 months ago #92166 by Todd Zuercher
Replied by Todd Zuercher on topic double function button
I think you might want to use the Toggle2NIST and if you still have a problem with it going on and off, run the input through an edge detector.

Please Log in to join the conversation.

More
9 years 6 months ago #92194 by caio
Replied by caio on topic double function button
i think i will need both.
thanks

Please Log in to join the conversation.

More
9 years 6 months ago #92224 by caio
Replied by caio on topic double function button
i like to share my code for run-pause-resume button on joypad:
Code:
##### BUTTON START-PAUSE-RESUME loadrt and2 count=3 loadrt not count=2 loadrt edge count=1 setp edge.0.in-edge FALSE setp edge.0.out-width-ns 100000000 net runPause0 input.0.btn-base4 => edge.0.in net runPause1 edge.0.out => and2.0.in0 net runPause1 edge.0.out => and2.2.in0 net runPause1 edge.0.out => and2.3.in1 net runPause2 halui.program.is-running => not.0.in net runPause2 halui.program.is-running => and2.2.in1 net runPause3 not.0.out => and2.0.in1 net runPause4 and2.0.out => and2.1.in1 net runPause5 and2.1.out => halui.mode.auto net runPause5 and2.1.out => halui.program.run net runPause6 and2.2.out => halui.program.pause net runPause7 halui.program.is-paused => not.1.in net runPause7 halui.program.is-paused => and2.3.in0 net runPause8 and2.3.out => halui.program.resume net runPause9 not.1.out => and2.1.in0 addf and2.0 servo-thread addf and2.1 servo-thread addf and2.2 servo-thread addf and2.3 servo-thread addf not.0 servo-thread addf not.1 servo-thread addf edge.0 servo-thread #####

hoping it can help someone.

Please Log in to join the conversation.

Time to create page: 0.081 seconds
Powered by Kunena Forum