Kinematics... again:/

More
7 years 9 months ago #123524 by andypugh
Replied by andypugh on topic Kinematics... again:/

chimeno wrote: Hello Andy, I'm sorry if I did not explain myself well, I say if modified genserkin is tested and it works?


I don't actually know, sorry. I just advised a bit by email.

Please Log in to join the conversation.

More
7 years 9 months ago #123719 by chimeno
Replied by chimeno on topic Kinematics... again:/
Hello Andy,
I just installed the modified version of genserkins, I get an error "undefined symbol: go_matrix_vector_mult" any idea how to fix it?
regards
Chimeno

Attachment not found

Please Log in to join the conversation.

More
7 years 9 months ago #123723 by andypugh
Replied by andypugh on topic Kinematics... again:/
Hmm, not really.

I wonder if that was something that needed to be added to gomath to support sliding joints?

Please Log in to join the conversation.

More
7 years 9 months ago #123755 by thang
Replied by thang on topic Kinematics... again:/
Where can i get that modified version? I assume i saw it somewhere but forgot.

Please Log in to join the conversation.

More
7 years 9 months ago #123768 by andypugh
Replied by andypugh on topic Kinematics... again:/
I really don't know. It was 8 years ago and I wasn't really very involved.

sourceforge.net/p/emc/mailman/emc-users/...ail.com/#msg26845536

Please Log in to join the conversation.

More
7 years 9 months ago #123788 by chimeno
Replied by chimeno on topic Kinematics... again:/

thang wrote: Where can i get that modified version? I assume i saw it somewhere but forgot.



Hi Thang,
these are the files that I used, if it works, let me know, thank you
Chimeno

Please Log in to join the conversation.

More
7 years 9 months ago #123922 by chimeno
Replied by chimeno on topic Kinematics... again:/
Hi guys,
what is installed in the development version 2.8 but an error appears, it could be that this project is not finished, or something I am doing wrong?, I will continue investigating, thanks
Chimeno

Attachment not found

Please Log in to join the conversation.

More
7 years 9 months ago #123935 by thang
Replied by thang on topic Kinematics... again:/
Try change "Home" of joint 2 and joint 4( count from 0) in INI file to avoid singularities

Please Log in to join the conversation.

More
7 years 9 months ago #123989 by chimeno
Replied by chimeno on topic Kinematics... again:/

thang wrote: Try change "Home" of joint 2 and joint 4( count from 0) in INI file to avoid singularities



hello Thang
Thank you, I have tried some different ways to start HOME_SECUENCE, but I still get the same error,
thanks Chimeno

Please Log in to join the conversation.

More
7 years 8 months ago #125591 by chimeno
Replied by chimeno on topic Kinematics... again:/
hello again, I attach some screenshots of the progress, they are just simulations, there is much in the aspect of the cinematic.
regards
Chimeno

Attachment not found

Attachment not found

Please Log in to join the conversation.

Time to create page: 3.711 seconds
Powered by Kunena Forum