- Posts: 19306
- Thank you received: 0
hy_VFD hy_VFD vfd.speed-command not setting RPM
8 years 2 months ago #115566
by andypugh
I partly used DMX because I found it in purple, and that made it more obvious in the wiring scheme. And I like to wire in orange, pink and purple so that nobody makes assumptions about what a wire is.
Replied by andypugh on topic hy_VFD hy_VFD vfd.speed-command not setting RPM
curtisa wrote: [Or even some generic two-core shielded microphone cable. RS485 is, by design a fairly robust protocol, so you don't need to spend a fortune on premium shielded cables to get reliable performance.
I partly used DMX because I found it in purple, and that made it more obvious in the wiring scheme. And I like to wire in orange, pink and purple so that nobody makes assumptions about what a wire is.
Please Log in to join the conversation.
8 years 2 months ago #115578
by vre
Replied by vre on topic hy_VFD hy_VFD vfd.speed-command not setting RPM
No eBay APP ID and/or Cert ID defined in Kunena configurationI have connected pc with huanyang vfd with this adapter
with simple cat5 cable (about 4 meters length) without termination resistors
and works very good.
One usb adapter i have tried had issues.
with simple cat5 cable (about 4 meters length) without termination resistors
and works very good.
One usb adapter i have tried had issues.
Please Log in to join the conversation.
Time to create page: 0.056 seconds
