howto "reactivate" watchdog after timeout

Hi all,

i have connected a watchdog.ok-out to iocontrol.0.emc-enable-in, works great. But actually i have no idea how to connect the watchdog.enable-in correctly. Manual says, that this input must be set low and then high again to activate watchdog again.
But how can i do this - ideally with "iocontrol.0.user−request−enable" ?
Hope somebody can give me a hint...
Greetings

Andreas

linuxcnc.org/docs/2.7/html/man/man9/watchdog.9.html

It seems that you need to pulse the watchdog.enable-in from user-request-enable.

Sounds like a job for "oneshot" to me:

linuxcnc.org/docs/2.7/html/man/man9/oneshot.9.html