- Posts: 22012
- Thank you received: 4
updating to lcnc 2.8-dev
- tommylight
-
- Away
- Administrator
-
Less
More
7 years 6 months ago #131504
by tommylight
Replied by tommylight on topic updating to lcnc 2.8-dev
That is correct, meaning your realtime kernel is running properly.sir_wolf_art wrote:
Code:Note: Using POSIX realtime
Please Log in to join the conversation.
7 years 6 months ago #131507
by pl7i92
Replied by pl7i92 on topic updating to lcnc 2.8-dev
tommy can you have uspace mesa ethernet also on the 18.04 ubuntu running
Please Log in to join the conversation.
- tommylight
-
- Away
- Administrator
-
Less
More
- Posts: 22012
- Thank you received: 4
7 years 6 months ago #131512
by tommylight
I lately found a kernel made for high end audio systems running linux that works on Linux Mint very nicely.
The only thing i do not like when compiling a new kernel is it gets very big and takes long to boot, as it will install drivers for almost anything possible. The good thing is once you compile a kernel, make debs for it and save them to a USB, later on you can use those debs to install the kernel in 3 minutes instead of several hours.
Replied by tommylight on topic updating to lcnc 2.8-dev
Yes of course. You can use the tutorial to compile it, or search the web for a ready made Preempt-RT kernel.pl7i92 wrote: tommy can you have uspace mesa ethernet also on the 18.04 ubuntu running
I lately found a kernel made for high end audio systems running linux that works on Linux Mint very nicely.
The only thing i do not like when compiling a new kernel is it gets very big and takes long to boot, as it will install drivers for almost anything possible. The good thing is once you compile a kernel, make debs for it and save them to a USB, later on you can use those debs to install the kernel in 3 minutes instead of several hours.
Please Log in to join the conversation.
Time to create page: 0.048 seconds
