Problem with configuration of Stober inverter

marcin2458
Topic Author
Offline
New Member

7 years 2 months ago #142811 by marcin2458

Problem with configuration of Stober inverter was created by marcin2458

Hello everyone,

for some time, I have been trying to configure the Stober's inverter MDS5015 on ethercat. I supported examples found on the internet, among others from sittner or roschi. So far I haven't even managed to move the engine shaft even though the configuration seems to be good. Please, could anyone look at my configuration and indicate where I made the mistake?

Best regards,
Marcin

Warning: Spoiler!

Please Log in to join the conversation.

tommylight
Offline
Administrator

7 years 2 months ago #142951 by tommylight

Replied by tommylight on topic Problem with configuration of Stober inverter

I have used only Mesa ethernet so i can not help.
I did reply so it moves to the top of "recent topics", maybe it was missed by someone who can help.

Please Log in to join the conversation.

andypugh
Offline
Administrator

7 years 2 months ago #143375 by andypugh

Replied by andypugh on topic Problem with configuration of Stober inverter

Maybe point to this thread from a post in the EtherCAT HAL driver thread ? As this seems to be an EtherCAT question.
(I have never touched EtherCAT)

Please Log in to join the conversation.

marcin2458
Topic Author
Offline
New Member

7 years 2 months ago #143414 by marcin2458

Replied by marcin2458 on topic Problem with configuration of Stober inverter

I will do that,

Thanks both of you for any answer

Please Log in to join the conversation.

Time to create page: 0.079 seconds