Graphing a HAL configuration

If working in master, the python hal library supports some possibly useful functions.

get_info_pins()
linuxcnc.org/docs/devel/html/hal/halmodule.html#_get_info_pins

Thanks for the tip. I know I can use the library because I recognoze the code is like what I wrote ( listOdicts in my code vs listofdicts 555)

tomp

Thanks Andy
I contacted PJensen at ancient tubeclock address.
I'll see if he gets the message
("dingly ping": DiscWorld)
tomp

I got parsing output of to create new graph automatically.
TODO allow multiple hal, bash. python, M1xx files to be aded to project dictionary.
Those can be data sources or sinks and normall y Hal doesnt know about them.
( Like a bash scripot that sets a signal or pin )
TODO: Spread out initial placement to make rats nest easier to work with.
(usinga grid suited to number of nodes ( ie: 3x3 or 5x5 etc)
TODO FilePickers
TODO a node editor to change the side where net enters
and allow changes to pin order in node (helps untangle)
TODO write to hal
Happy New Yeay
Chok Di Pi Mai!

now on github
github.com/tjtr33/Nodz
news: 22jan2022 23:00   now has automatic converter
  if you capture the output of 'halcmd show sig > yourfname.signals'
  then you can choose that file
  and save the converted output ( yourfname.json)
  You can then load yourfname.json and see it as an editable moveable zoomable graph
  Please upload example showsig files so I can test ( i dont have your hardware, so cannot create )

Now runs with python3 ( 3.7) 29jan2022
Try with the 3 supplied files SaveMe01... SaveMe02... Save<e03...
use      to see the progression from [/code]