Serial port addressing

More
6 years 10 months ago #151772 by bright
Serial port addressing was created by bright
i picked up a serial port card to give me a few more inputs to use along with my parallel port. i'm having a problem with the addressing, any help would be appreciated

Attachment not found

Attachment not found

Attachment not found

Please Log in to join the conversation.

More
6 years 10 months ago #151797 by andypugh
Replied by andypugh on topic Serial port addressing
You might have to prevent the kernel serial driver loading.

Try running "modprobe serial" before running LinuxCNC.

(use lsmod to see if there actually is a serial driver loaded)

Please Log in to join the conversation.

Time to create page: 0.094 seconds
Powered by Kunena Forum