Is there a Halpin for the current feedrate

Have you looked at these with the HAL scope?

A patch to add pin motion.feed-upm:
github.com/LinuxCNC/linuxcnc/commit/772c...98162ba56639d231311f


I won't commit until #865 is fixed;
github.com/LinuxCNC/linuxcnc/issues/865

Using the master branch with this defect is hazardous:

forum.linuxcnc.org/38-general-linuxcnc-q...tton-pressed-in-axis

dgarrett wrote: A patch to add pin motion.feed-upm:
github.com/LinuxCNC/linuxcnc/commit/772c...98162ba56639d231311f


I won't commit until #865 is fixed;
github.com/LinuxCNC/linuxcnc/issues/865

Using the master branch with this defect is hazardous:

forum.linuxcnc.org/38-general-linuxcnc-q...tton-pressed-in-axis

Dewey, Awesome, thanks very much. I tried doing that today but got tangled up with the pointers. Anyway, at least I know I was on the right track!

If you wanted another challenge, adding another tag for arc radius would be much appreciated. I did find the radius was calculated in interp_arc.cc but knew it would be a hard slog to learn how to follow it through.

I was thinking something like this would do the trick!
This is the other variable I'd like becasue the two together would let us do funky stuff to improve hole cut quality with plasma cutting in hal