Pin 'spindle-enable' does not exist

Muzzer
Offline
Elite Member

5 years 7 months ago #202893 by Muzzer

Replied by Muzzer on topic Pin 'spindle-enable' does not exist

Aha! I hadn't looked into that yet. The name "motmod" threw me!
linuxcnc.org/docs/2.8/html/man/man9/motion.9.html

Many thanks for the nudge - I'll digest that and hopefully another piece will fall into place.

Please Log in to join the conversation.

PCW
Offline
Platinum Member

5 years 7 months ago #202894 by PCW

Replied by PCW on topic Pin 'spindle-enable' does not exist

Also man motion
describes each motion pin/parameter

Please Log in to join the conversation.

Time to create page: 0.034 seconds