xhc-whb04b-6 and or2 problem with pin

szatri
Topic Author
Offline
Junior Member

5 years 4 months ago #212186 by szatri

xhc-whb04b-6 and or2 problem with pin was created by szatri

Hello, I have mpg and additional virtual buttons in axis, I want to combine the functions of the buttons on mpg and on the screen into one function of calling the program
I have these pins / commands:

pyvcp_options.hal:

Code:

loadrt or2 count=1
addf or2.0 servo-thread

net or2.0.in0 pdnt.macro.1
net or2.0.in1 halui.mdi-command-01
net pyvcp.safe-z or2.0.out

net remote-safe-z or2.0.out <= pyvcp.safe-z

xhc-whb04b-6.hal:

Code:

net pdnt.macro.1                        whb.button.macro-1                 halui.mdi-command-01

file hal:

Code:

[HAL]
HALFILE = ploter.hal
HALFILE = custom.hal
HALFILE = xhc-whb04b-6.hal
HALUI = halui
POSTGUI_HALFILE = postgui_call_list.hal

[HALUI]
MDI_COMMAND = O<touch-probe> call
MDI_COMMAND = O<safe-z> call
MDI_COMMAND = O<tool-change> call
MDI_COMMAND = O<parking> call
MDI_COMMAND = O<wrzec> call

##MPG
MDI_COMMAND=(debug,00)
MDI_COMMAND=(debug,macro1)
MDI_COMMAND=(debug,macro2)
MDI_COMMAND=(debug,macro3)
MDI_COMMAND=(debug,macro4)
MDI_COMMAND=G1 G53 X0 Y0 Z0 F4000
MDI_COMMAND=(debug,macro6)
MDI_COMMAND=G1 X0 Y0 Z0 F4000
MDI_COMMAND=(debug,macro8)
MDI_COMMAND=(debug,macro9)
MDI_COMMAND=(debug,macro10)
MDI_COMMAND=(debug,macro11)
MDI_COMMAND=(debug,macro12)
MDI_COMMAND=(debug,macro13)
MDI_COMMAND=(debug,macro14)
MDI_COMMAND=(debug,macro15)
MDI_COMMAND=(debug,macro16)
MDI_COMMAND=G1 G53 Z0 F4000
MDI_COMMAND=(debug,macro17)
MDI_COMMAND=(debug,macro18)
MDI_COMMAND=(debug,macro19)
##MPG

file safe-z.ngc

Code:

o<safe-z> sub

M5 M9

G49
G90

G53 G0 Z0                               

o<safe-z> endsub
m2

file custom_panel.xml

Code:

<button>
    <halpin>"safe-z"</halpin>
    <relief>RIDGE</relief>
    <text>"Zetka do gĂłry"</text> 
    <bd>1</bd>
    <pady>5</pady>
    <padx>0</padx>
    <font>("Helvetica",12)</font>
    <bg>"#870121"</bg>
    <fg>"#e3e7e6"</fg>
  </button> 

file custom.hal is empty
file postgui_call_list.hal:

Code:

source pyvcp_options.hal
source custom_postgui.hal

The current configuration shows this error:

Code:

pyvcp_options.hal:14: Pin 'pdnt.macro.1' does not exist

These are snippets from the configuration but I only need ordering examples for the net and or2 connections.

Please Log in to join the conversation.

alkabal
Offline
Platinum Member

5 years 4 months ago #212190 by alkabal

Replied by alkabal on topic xhc-whb04b-6 and or2 problem with pin

I think your hal link are not correct
you need to change :

Code:

xhc-whb04b-6.hal:
net pdnt.macro.1                        whb.button.macro-1                 #halui.mdi-command-01

and add to your postgui hal

Code:

net pdnt.macro.1  => or2.0.in0 
net mdi_or2_in1   <= pyvcp.safe-z
net mdi_or2_in1   => or2.0.in1
net mdi-or2_out   => halui.mdi-command-01

Please Log in to join the conversation.

szatri
Topic Author
Offline
Junior Member

5 years 4 months ago #212191 by szatri

Replied by szatri on topic xhc-whb04b-6 and or2 problem with pin

Hello, does what I have marked on the screen are mutually exclusive?

I corrected 4 commands, but still the problem:

Code:

loadrt or2 count=4
addf or2.0 servo-thread
addf or2.1 servo-thread
addf or2.2 servo-thread
addf or2.3 servo-thread

net pdnt.macro.1  => or2.0.in0 
net mdi_or2.0.in1   <= pyvcp.safe-z
net mdi_or2.0.in1   => or2.0.in1
net mdi-or2.0.out   => halui.mdi-command-01

net pdnt.macro.2  => or2.1.in0 
net mdi_or2.1.in1   <= pyvcp.tool-change
net mdi_or2.1.in1   => or2.1.in1
net mdi-or2.1.out   => halui.mdi-command-02

net pdnt.macro.3  => or2.2.in0 
net mdi_or2.2.in1   <= pyvcp.parking
net mdi_or2.2.in1   => or2.2.in1
net mdi-or2.2.out   => halui.mdi-command-03

net pdnt.macro.4  => or2.3.in0 
net mdi_or2.3.in1   <= pyvcp.wrzec
net mdi_or2.3.in1   => or2.3.in1
net mdi-or2.3.out   => halui.mdi-command-04

net remote-touch-probe halui.mdi-command-00 <= pyvcp.touch-probe
net remote-safe-z or2.0.out <= pyvcp.safe-z
net remote-tool-change or2.1.out <= pyvcp.tool-change
net remote-parking or2.2.out <= pyvcp.parking
net remote-wrzec or2.3.out <= pyvcp.wrzec

gives the following error

pyvcp_options.hal:40: Pin 'pyvcp.safe-z' was already linked to signal 'mdi_or2.0.in1'

Only when # it starts, but the buttons do not work:

Code:

#net remote-safe-z or2.0.out <= pyvcp.safe-z
#net remote-tool-change or2.1.out <= pyvcp.tool-change
#net remote-parking or2.2.out <= pyvcp.parking
#net remote-wrzec or2.3.out <= pyvcp.wrzec

Please Log in to join the conversation.

alkabal
Offline
Platinum Member

5 years 4 months ago #212203 by alkabal

Replied by alkabal on topic xhc-whb04b-6 and or2 problem with pin

Code:

loadrt or2 count=4
addf or2.0 servo-thread
addf or2.1 servo-thread
addf or2.2 servo-thread
addf or2.3 servo-thread

net pdnt.macro.1  => or2.0.in0 
net mdi_or2.0.in1   <= pyvcp.safe-z
net mdi_or2.0.in1   => or2.0.in1
net mdi_or2.0.out   <= or2.0.out
net mdi_or2.0.out   => halui.mdi-command-01

net pdnt.macro.2  => or2.1.in0 
net mdi_or2.1.in1   <= pyvcp.tool-change
net mdi_or2.1.in1   => or2.1.in1
net mdi_or2.1.out   <= or2.1.out
net mdi_or2.1.out   => halui.mdi-command-02

net pdnt.macro.3  => or2.2.in0 
net mdi_or2.2.in1   <= pyvcp.parking
net mdi_or2.2.in1   => or2.2.in1
net mdi_or2.2.out   <= or2.2.out
net mdi_or2.2.out   => halui.mdi-command-03

net pdnt.macro.4  => or2.3.in0 
net mdi_or2.3.in1   <= pyvcp.wrzec
net mdi_or2.3.in1   => or2.3.in1
net mdi_or2.3.out   <= or2.3.out
net mdi_or2.3.out   => halui.mdi-command-04

net remote-touch-probe halui.mdi-command-00 <= pyvcp.touch-probe

Try that i appologize they are a typo error and missed to connect the output signal to mdi in the first attempt

Please Log in to join the conversation.

szatri
Topic Author
Offline
Junior Member

5 years 4 months ago #212262 by szatri

Replied by szatri on topic xhc-whb04b-6 and or2 problem with pin

Code:

loadrt or2 count=4
addf or2.0 servo-thread
addf or2.1 servo-thread
addf or2.2 servo-thread
addf or2.3 servo-thread

net pdnt.macro.1  => or2.0.in0 
net mdi_or2.0.in1   <= pyvcp.safe-z
net mdi_or2.0.in1   => or2.0.in1
net mdi_or2.0.out   <= or2.0.out
net mdi_or2.0.out   => halui.mdi-command-01

net pdnt.macro.2  => or2.1.in0 
net mdi_or2.1.in1   <= pyvcp.tool-change
net mdi_or2.1.in1   => or2.1.in1
net mdi_or2.1.out   <= or2.1.out
net mdi_or2.1.out   => halui.mdi-command-02

net pdnt.macro.3  => or2.2.in0 
net mdi_or2.2.in1   <= pyvcp.parking
net mdi_or2.2.in1   => or2.2.in1
net mdi_or2.2.out   <= or2.2.out
net mdi_or2.2.out   => halui.mdi-command-03

net pdnt.macro.4  => or2.3.in0 
net mdi_or2.3.in1   <= pyvcp.wrzec
net mdi_or2.3.in1   => or2.3.in1
net mdi_or2.3.out   <= or2.3.out
net mdi_or2.3.out   => halui.mdi-command-04

net remote-touch-probe halui.mdi-command-00 <= pyvcp.touch-probe
net remote-safe-z halui.mdi-command-01 <= pyvcp.safe-z
net remote-tool-change halui.mdi-command-02 <= pyvcp.tool-change
net remote-parking halui.mdi-command-03 <= pyvcp.parking
net remote-wrzec halui.mdi-command-04 <= pyvcp.wrzec

xhc-whb04b-6.hal:

Code:

# Connect macro buttons to mdi commands

net pdnt.macro.1                        whb.button.macro-1                 halui.mdi-command-01
net pdnt.macro.2                        whb.button.macro-2                 halui.mdi-command-02
net pdnt.macro.3                        whb.button.macro-3		   halui.mdi-command-03
net pdnt.macro.4                        whb.button.macro-4                 halui.mdi-command-04

pyvcp_options.hal:19: Pin 'halui.mdi-command-01' was already linked to signal 'pdnt.macro.1'

Please Log in to join the conversation.

alkabal
Offline
Platinum Member

5 years 4 months ago #212263 by alkabal

Replied by alkabal on topic xhc-whb04b-6 and or2 problem with pin

your code Edited

Code:

loadrt or2 count=4
addf or2.0 servo-thread
addf or2.1 servo-thread
addf or2.2 servo-thread
addf or2.3 servo-thread

net pdnt.macro.1  => or2.0.in0 
net mdi_or2.0.in1   <= pyvcp.safe-z
net mdi_or2.0.in1   => or2.0.in1
net mdi_or2.0.out   <= or2.0.out
net mdi_or2.0.out   => halui.mdi-command-01

net pdnt.macro.2  => or2.1.in0 
net mdi_or2.1.in1   <= pyvcp.tool-change
net mdi_or2.1.in1   => or2.1.in1
net mdi_or2.1.out   <= or2.1.out
net mdi_or2.1.out   => halui.mdi-command-02

net pdnt.macro.3  => or2.2.in0 
net mdi_or2.2.in1   <= pyvcp.parking
net mdi_or2.2.in1   => or2.2.in1
net mdi_or2.2.out   <= or2.2.out
net mdi_or2.2.out   => halui.mdi-command-03

net pdnt.macro.4  => or2.3.in0 
net mdi_or2.3.in1   <= pyvcp.wrzec
net mdi_or2.3.in1   => or2.3.in1
net mdi_or2.3.out   <= or2.3.out
net mdi_or2.3.out   => halui.mdi-command-04

net remote-touch-probe halui.mdi-command-00 <= pyvcp.touch-probe

xhc-whb04b-6.hal:

Code:

# Connect macro buttons to mdi commands

net pdnt.macro.1                        whb.button.macro-1                 #halui.mdi-command-01
net pdnt.macro.2                        whb.button.macro-2                 #halui.mdi-command-02
net pdnt.macro.3                        whb.button.macro-3		   #halui.mdi-command-03
net pdnt.macro.4                        whb.button.macro-4                 #halui.mdi-command-04

Please Log in to join the conversation.

szatri
Topic Author
Offline
Junior Member

5 years 4 months ago #212265 by szatri

Replied by szatri on topic xhc-whb04b-6 and or2 problem with pin

Thanks a lot, I would never have done it myself.
I have a question if there is any topic about using / calibrating this mpg, because the right switch in manual mode does not change the feed pitch (by a given distance) only the general OVERRIDE (first bar in the axis)

Please Log in to join the conversation.

alkabal
Offline
Platinum Member

5 years 4 months ago #212266 by alkabal

Replied by alkabal on topic xhc-whb04b-6 and or2 problem with pin

Well i'm unsure if i really answear to your question.

the right switch as i know is depending on the selected mode :
at startup is mode Mpg used for feedoverride
you can swap to mode Contiunous or Step using the corresponding button
using lead position you can change spindle override
after go back from position lead you get again Mpg mode for feedoverride

Please Log in to join the conversation.

szatri
Topic Author
Offline
Junior Member

5 years 4 months ago #212314 by szatri

Replied by szatri on topic xhc-whb04b-6 and or2 problem with pin

alkabal wrote: you can swap to mode Contiunous or Step using the corresponding button

Hello, which button is it? is it on mpg?

Please Log in to join the conversation.

alkabal
Offline
Platinum Member

5 years 4 months ago #212322 by alkabal

Replied by alkabal on topic xhc-whb04b-6 and or2 problem with pin

yes on both side from mpg wheel

Please Log in to join the conversation.

Time to create page: 0.117 seconds