x axis direction whb04b-6

I have a linuxcnc lathe, how do I change the X axis direction when using whb04b-6? When rotated clockwise, the X coordinate value increases, but it is necessary for the coordinate values to decrease.

Put a - (minus) in front of the SCALE for that axis/joint.
Never used one so not sure where exactly that would be.

Post your hal and ini files please.

The machine is still in the build process, I am only tweaking the software part, so not all parameters are correct. gcode is executing correctly. Problem when using mpg whb04b-6. If you turn the knob clockwise on a physical machine, then the cutter moves from me to the center of rotation of the spindle and this is normal, but if you turn the mpg whb04b-6 knob clockwise, then the cutter moves towards me from the center of rotation of the spindle, and this is not correct. I want to get the controls I am accustomed to.

Axis movement Z is correct

Maybe you could use a 'MULT2'-component to multiply 'whb.axis.x.jog-scale' with -1 to reverse the direction and then connect the output-pin to 'axis.x.jog-scale'

    everything worked out, only I had to use the functions conv_float_s32, conv_s32_float, mult2