halcompile problem

bkt
Topic Author
Offline
Platinum Member

5 years 3 weeks ago #222550 by bkt

halcompile problem was created by bkt

I try after long time to compile a new kinematics type .... so i try:

Code:

k@k:~/linuxcnc-dev/src/emc/kinematics$ sudo halcompile --preprocess rotarydeltakins-k2020.c
Unrecognized file type for mode preprocess: 'rotarydeltakins-k2020.c'

But obtain warning/error messages ..... but file exist on that folder ... so not understand whats happens.

halcompile is installed:

[code]k@k:~$ locate halcompile /home/k/linuxcnc-dev/bin/halcompile .... ....

thanks for any help

[/code]

Please Log in to join the conversation.