I can't get spindle speed feedback

More
4 years 10 months ago #229835 by Servimet
I can't get spindle speed feedback was created by Servimet
Estimated for some reason I can't get spindle speed feedback !!
the rpm bar in the linux control is dead
I have a 7i92m-7i77 mesa set
I am very new to the linux world
I have tried several examples of hal files that I took from this forum and nothing worked so far
I attach my hal file
From already thank you very much

Please Log in to join the conversation.

More
4 years 10 months ago #229852 by cmorley
Replied by cmorley on topic I can't get spindle speed feedback
Please post all your config files.

Please Log in to join the conversation.

More
4 years 10 months ago #229876 by Hakan
Replied by Hakan on topic I can't get spindle speed feedback
counter_mode 1?
If it is a quadrature encoder, which I think most are, it should be counter_mode 0

Please Log in to join the conversation.

More
4 years 10 months ago #229880 by Servimet
Replied by Servimet on topic I can't get spindle speed feedback
Dear attached all my configuration files
I still don't have rpm in the linux panel
I appreciate your help

Please Log in to join the conversation.

More
4 years 10 months ago #229881 by Clive S
Replied by Clive S on topic I can't get spindle speed feedback

Dear attached all my configuration files
I still don't have rpm in the linux panel
I appreciate your help

Where have you attached them ?

Please Log in to join the conversation.

More
4 years 10 months ago #229884 by Servimet
Replied by Servimet on topic I can't get spindle speed feedback
 

Attachment not found

Attachment not found

Attachment not found

Attachment not found

Please Log in to join the conversation.

More
4 years 10 months ago #229885 by Servimet
Replied by Servimet on topic I can't get spindle speed feedback
 

Attachment not found

Attachment not found

Attachment not found

Attachment not found

Please Log in to join the conversation.

More
4 years 10 months ago #229886 by Servimet
Replied by Servimet on topic I can't get spindle speed feedback
Hi Hakan, this is the moment, I'm editing the file extension to be able to upload it to the forum. I would appreciate your help in a review.

Please Log in to join the conversation.

More
4 years 10 months ago #229887 by Servimet
Replied by Servimet on topic I can't get spindle speed feedback
Hello Clive S, this time I am editing the extension of the configuration files to be able to upload it all to the forum
I would appreciate your help

Please Log in to join the conversation.

More
4 years 10 months ago #229889 by Clive S
Replied by Clive S on topic I can't get spindle speed feedback

Hello Clive S, this time I am editing the extension of the configuration files to be able to upload it all to the forum
I would appreciate your help

Is it correct that the only file Sabre_1000_2021-12-24.hal is the only one with any data in it.

It might be better to zip the complete config up.

Can you also give a description of the machine ie. how many axis XYZ does  it have a A axis
as the HAL file seems to have a few duplications  

The ini file is missing as well.

Please Log in to join the conversation.

Time to create page: 0.113 seconds
Powered by Kunena Forum