ArduinoIO HAL component

It's fixed the BUG?

Hi Dino,
I came across this and was considering giving it a try. I see that that the .py code stipulates <2.7, and I’m running 2.9 pre now (which I think is >Python 3). Would you expect it to work with 3, or do you plan to update?

thanks, Ron

Hi,
there is no problems to use the code as is with python 3.x.y the __future__ statements is necessary only for use the print function in the newer format
I'm happy to know your feedback. I have draw a little PCB to control the spindle inverter with an Arduino NANO Every, if it's useful I can publish the schematic and the board.

Dino

Thanks for the reply. I think I’m about ready to try this out… need the remote IO’s for a new control panel. There will probably be some questions as some of this is new territory for me.

i just stumbled upon your project. I've been working on a similar project too.
Maybe we can cooperate.
github.com/AlexmagToast/LinuxCNC_ArduinoConnector

I just stumbled across your YT channel by accident nice stuff!

Just bumbling my way through this starting from an ESP32-S3. Haven't been able to put much time into it yet

AlexMagToast wrote:

i just stumbled upon your project. I've been working on a similar project too.
Maybe we can cooperate.
github.com/AlexmagToast/LinuxCNC_ArduinoConnector
 

Nicely done. Up and running in 5 minutes!! Good job and thank you!