Two pwmgen axis and pwmgen spindle HAL file and ini for 7i95 board

More
2 years 7 months ago #294981 by Nathan40
Two pwmgen axis and pwmgen spindle HAL file and ini for 7i95 board was created by Nathan40
Hi, 
Please can you help setting LATHE machines with 2 axis pwmgens with encoder and 1 pwmgen for spindle with encoder for 7i95 boards:
a. HAL file
b. INI file

Regards

Please Log in to join the conversation.

More
2 years 7 months ago #295047 by andypugh
Replied by andypugh on topic Two pwmgen axis and pwmgen spindle HAL file and ini for 7i95 board
Have you tried making a starting config with PnCConf? (Or possibly with MesaCT gnipsel.com/linuxcnc/mesact/index.html )

Please Log in to join the conversation.

More
2 years 7 months ago #295050 by Nathan40
Replied by Nathan40 on topic Two pwmgen axis and pwmgen spindle HAL file and ini for 7i95 board
Tried both and ended in disaster. PncConf is not supported by 7i95. Tried created dummy profile. MesaCT threw errors.
Please help with the profiles.

Please Log in to join the conversation.

More
2 years 7 months ago #295052 by andypugh
Replied by andypugh on topic Two pwmgen axis and pwmgen spindle HAL file and ini for 7i95 board
You are probably still best making a start with one of the tools, then working through the errors one by one.

Please Log in to join the conversation.

More
2 years 7 months ago #295059 by Nathan40
Replied by Nathan40 on topic Two pwmgen axis and pwmgen spindle HAL file and ini for 7i95 board
Failed miserably in making profiles! 

Please Log in to join the conversation.

More
2 years 7 months ago #295060 by PCW
Replied by PCW on topic Two pwmgen axis and pwmgen spindle HAL file and ini for 7i95 board
Have you tried using pncconfs discover option?

Please Log in to join the conversation.

More
2 years 7 months ago #295167 by PCW
Replied by PCW on topic Two pwmgen axis and pwmgen spindle HAL file and ini for 7i95 board
mesact will make a working 7I95configuration for stepgens
it should not be terribly difficult to edit the main.hal file
to change the output to PWMgens instead of stepgens

Please Log in to join the conversation.

Time to create page: 0.171 seconds
Powered by Kunena Forum