emc.hh -- hal_priv.hh --- etc etc not find

Aciera
Offline
Administrator

2 years 3 months ago #305330 by Aciera

Replied by Aciera on topic emc.hh -- hal_priv.hh --- etc etc not find

OOps, my appologies.
I just realized that I also have a 2.10 rip installation on that machine. So you are probably right and the deb installation does not come with the c source files. Kind of makes sense I guess.

Please Log in to join the conversation.

bkt
Topic Author
Offline
Platinum Member

2 years 3 months ago #305334 by bkt

Replied by bkt on topic emc.hh -- hal_priv.hh --- etc etc not find

at the end I compile a rip with these:

Code:

./configure --with-realtime=uspace --enable-non-distributable=yes --disable-build-documentation-translation

but have these error too ...

Code:

./config.status --file=../docs/man/man1/linuxcnc.1:../docs/src/man/man1/linuxcnc.1.in
config.status: creating ../docs/man/man1/linuxcnc.1
a2x -v --doctype manpage \
    --format manpage \
    --destination-dir `dirname ../docs/man/man1/5axisgui.1` \
    --xsltproc-opts="--nonet" \
    -a mansource=LinuxCNC \
    -a manmanual='LinuxCNC Documentation' \
    ../docs/src/man/man1/5axisgui.1.adoc
/bin/bash: line 1: a2x: command not found
make: *** [../docs/src/Submakefile:1002: ../docs/man/man1/5axisgui.1] Error 127

Please Log in to join the conversation.

bkt
Topic Author
Offline
Platinum Member

2 years 3 months ago #305335 by bkt

Replied by bkt on topic emc.hh -- hal_priv.hh --- etc etc not find

Aciera wrote:
OOps, my appologies.
I just realized that I also have a 2.10 rip installation on that machine. So you are probably right and the deb installation does not come with the c source files. Kind of makes sense I guess.

you made me feel shocked... I'm not 30 anymore but I didn't remember about the /linuxcnc folder... I thought I had problems with my memory and the scorching heat that is here these days.

Please Log in to join the conversation.

Aciera
Offline
Administrator

2 years 3 months ago #305338 by Aciera

Replied by Aciera on topic emc.hh -- hal_priv.hh --- etc etc not find

Yea, my memory is certainly not what it once was and I cannot blame the heat. The only excuse I have is that I almost exclusively use rip installs.

Regarding the error you may want to try:

Code:

sudo apt install asciidoc

Please Log in to join the conversation.

bkt
Topic Author
Offline
Platinum Member

2 years 3 months ago #305343 by bkt

Replied by bkt on topic emc.hh -- hal_priv.hh --- etc etc not find

Aciera wrote:
Yea, my memory is certainly not what it once was and I cannot blame the heat. The only excuse I have is that I almost exclusively use rip installs.

Regarding the error you may want to try:

Code:

sudo apt install asciidoc

Code:

haarrgg ... not use

Code:

dpkg-checkbuilddeps ....

Please Log in to join the conversation.

bkt
Topic Author
Offline
Platinum Member

2 years 3 months ago #305346 by bkt

Replied by bkt on topic emc.hh -- hal_priv.hh --- etc etc not find

now I have these error ... somethings in git??

Code:

git clone https://github.com/LinuxCNC/linuxcnc.git linuxcnc-source-dir
Cloning into 'linuxcnc-source-dir'...
remote: Enumerating objects: 308517, done.
remote: Counting objects: 100% (1482/1482), done.
remote: Compressing objects: 100% (693/693), done.
remote: Total 308517 (delta 856), reused 1326 (delta 768), pack-reused 307035
Receiving objects: 100% (308517/308517), 595.81 MiB | 21.89 MiB/s, done.
fatal: serious inflate inconsistency
fatal: fetch-pack: invalid index-pack output

Please Log in to join the conversation.

bkt
Topic Author
Offline
Platinum Member

2 years 3 months ago #305378 by bkt

Replied by bkt on topic emc.hh -- hal_priv.hh --- etc etc not find

github restart correctly after 30min ... all solved.

About other error ... running dpkg-checkbuilddeps command discover a list of unistalled libs (why if LMDE 6 have on package manager linuxcnc and linuxcnc-ethercat ???? .... mistery of life).

Any how now I have all lib needed istalled and visible from my c++ heather file. Hope it works now as aspect.

Thaks to all ....

Please Log in to join the conversation.

Aciera
Offline
Administrator

2 years 3 months ago #305382 by Aciera

Replied by Aciera on topic emc.hh -- hal_priv.hh --- etc etc not find

About other error ... running dpkg-checkbuilddeps command discover a list of unistalled libs (why if LMDE 6 have on package manager linuxcnc and linuxcnc-ethercat ???? .... mistery of life).

The package installer only installs the runtime dependencies.
Since you are _building_ LinuxCNC you need the build dependencies.

Please Log in to join the conversation.

bkt
Topic Author
Offline
Platinum Member

2 years 3 months ago #305408 by bkt

Replied by bkt on topic emc.hh -- hal_priv.hh --- etc etc not find

sorry but in my mind package contain all .... and never think build process need library not necessary for running applications ..... so now I understand thanks

.... any how just discover pakage installer never install libnml or lnml .... and these is not undertand because in my knowelge lnml is necessary for a working Linuxcnc ...... so why is not present in package intallation of linuxcnc.deb of lmde6 ? perhaps is possible these? or simply it change name?

in lcnc 2.9.0 and 2.9.1 lnml was locate in /usr/include/linuxcnc ..... but not find these folder now .... why? Where are locate now? nautilus not find it ....

Please Log in to join the conversation.

rodw
Offline
Platinum Member

2 years 3 months ago #305414 by rodw

Replied by rodw on topic emc.hh -- hal_priv.hh --- etc etc not find

sudo apt install linuxcnc-uspace-dev is probably required
if working from source follow my video

If you can connect apt to Debian 13 Trixie you will have access to 2.9.3 in the Debian repositories

Life is so much easier if you stick to Debian

Please Log in to join the conversation.

Time to create page: 0.054 seconds